Carver x GRLSWIRL Daydream CX Surf Skateboard | 28"

Carver x GRLSWIRL Daydream Surfskate Complete | CX Raw 28"

Carries like a mini. Rides like a bigger board.

The Daydream is GRLSWIRL's compact Carver: a round-nose, square-tail shape at 28" x 9.25" on a tight 15" wheelbase. Refined over years of making minis, it pumps easily and carves with confidence, from neighbourhood cruising to training sessions.

GRLSWIRL is a Venice skate crew co-founded by Lucy Osinski and Lindsey Klucik, built around getting more people on boards. Carver only builds the Daydream with CX, because the short wheelbase suits the CX's snappier rail feel, and 65mm Orange Glo Slicks keep it rolling fast.

Key Features

• Round-nose, square-tail mini: a compact shape that's easy to carry and quick to turn
• GRLSWIRL graphic: a bright collab graphic from the Venice crew
• Carver CX surfskate trucks: Carver's most popular system. The reverse-kingpin CX front truck turns deep and quick when you pump, but stays stable and predictable at speed, so it suits everyone from first-timers to park riders
• Roundhouse Slicks 65mm 83a wheels: a slightly firmer wheel with a rounded lip, so it breaks loose into smooth slides and snaps
• Carver ABEC 7 Built-In bearings: smooth and fast, with built-in spacers
• Fully assembled and gripped: ready to ride

Specs

• Length: 28"
• Width: 9.25"
• Wheelbase: 15"
• Deck: 7-ply maple
• Shape: Round nose, square tail
• Front truck: Carver CX front (reverse kingpin, 9" axle, 3-5/8" tall), Raw
• Rear truck: Carver C2 rear
• Bushings: Carver 87a Smoke
• Wheels: Carver Roundhouse Slicks 65mm 83a Orange Glo
• Bearings: Carver ABEC 7 Built-In
• Risers / hardware: 3/16" gaskets x2 (3/8" total), 1.25" hardware
• Best for: Pumping, tight carves, cruising and smaller riders
• Collab: GRLSWIRL

About Carver Skateboards

Carver Skateboards was founded in 1996 in Venice, California, by surfers Neil Stratton and Greg Falk. They wanted a board that felt like surfing on land, so they built the C7: a front truck on a pivoting swing arm that lets the board pump and carve like a surfboard on a wave. That truck started the surfskate category, and Carver calls it the original surfskate.

Around 2005 Carver added the CX, a lighter, snappier reverse-kingpin truck that became its most popular system. Three decades on, Carver still designs out of Culver City, California, and works with surf names like Channel Islands, ...Lost, Kai Lenny and Yago Dora. Surfers around the world use Carvers to train between sessions, and plenty of skaters ride them simply because carving a Carver is that much fun.

FAQs

What is a surfskate?
A surfskate is a skateboard with a special front truck that pivots and turns much further than a normal truck. That lets you pump the board (generate speed by twisting your body, like on a wave) and carve tight, surf-style turns without pushing. Surfers use them to train turns and timing on land, and skaters ride them for the flow. Carver's C7, released in 1996, is widely regarded as the original surfskate truck.

Is a 28" surfskate the right size for me?
At 9.25" wide, 28" sits at the compact end of Carver's range. The short wheelbase makes it quick and tight to turn and easy to carry, so it suits smaller and lighter riders, plus anyone wanting a portable board for the car or the beach. Adults ride it too, but taller riders, or anyone wanting a little more stability, often go 31"–32.5".

Is this a good surfskate for beginners?
Yes. The CX is Carver's most stable and predictable surfskate truck, which is why we recommend it for most first-time surfskaters. Start on flat, smooth ground, get comfortable carving, then start pumping. It feels loose at first, but most riders find their rhythm within a session or two.

What's the difference between Carver CX, C7 and C5 trucks?
CX is Carver's most popular truck: a reverse-kingpin design that's lighter, snappier and more stable at speed, so it's the best all-rounder and the one we recommend for most riders and for skateparks. C7 is the original 1996 swing-arm truck, with a smoother, longer, more flowing surf feel; riders chasing a pure surf-training feel often prefer it. C5 is compact and lower, with an 8.5" axle, made for smaller boards, kids and lighter riders. CX and C7 completes run a C2 rear truck, and C5 completes run a C4 rear.

Can I cruise or commute on it?
Yes, for short trips around the neighbourhood, to the beach or the shops. Once you can pump you'll cover flat ground with very little pushing. Surfskates are built for carving, so they feel looser than a cruiser at speed; for long, flat commutes a longboard or cruiser is more efficient. The 65mm Slicks are a touch firmer than Carver's 78a wheels, so they roll fast on smooth footpaths and feel a little livelier on rough ones.

Does it come ready to ride?
Yes. It arrives fully assembled with griptape, Carver trucks, wheels and ABEC 7 bearings installed. Just check the bushings feel right for your weight and go surf the street.

Why Buy From Twelve Board Store

• ✔️ Free shipping Australia-wide on orders over $90
• ✔️ Expert skate advice from real riders, 7 days a week
• ✔️ Easy returns for a hassle-free experience
• ✔️ Huge range of skate, snow & electric gear
• ✔️ Proudly Australian owned & operated

Surf the street. Carver since 1996.