







Flux CV Snowboard Binding 2027 | Offwhite
Select Your Size: M (US 7-9.5)
Select Your Pre Order: Ships Mid November 2026
- Stock
- Only 1 left
- Dispatch
- Ships next business day
ADD 2 OR MORE ITEMS TO CART — GET AN EXTRA 10% OFF. DISCOUNT AUTO APPLIED AT CHECKOUT. EXCLUDES ELECTRICS.
Available in store
Available online
Flux CV Snowboard Binding 2027 | Offwhite
Flux CV in Offwhite: Deep Carves, Clean Lines.
Offwhite looks clean on a fresh topsheet and even cleaner trenching a groomer. The Flux CV is Flux's carving and freeride binding: a 1.5cm higher heel cup, the Buffalo Highback and Boost FootOn, all tuned for deeper, faster turns.
It is the binding we put on stiff carving boards when someone wants the board to do what they ask, instantly. For 26/27 it adds Heel Up, an angled heel pedal that helps on backside turns and makes lifting the board easier.
The Tech and What It Does on the Hill
✅ Buffalo Highback in Super Tough Nylon: two pillars brace the flat highback from both sides, and they are thicker this season, so heelside pressure goes straight into the edge
✅ Heel cup 1.5cm higher than other Flux models: more leverage and less drag when you lay the board over on deep carves
✅ Boost FootOn: 4mm more cushion height than the standard FootOn, which lifts you off the board for quicker edge changes and soaks up fine chatter
✅ Heel Up: new for 26/27. An angled heel pedal that helps on backside turns and makes lifting the board easier
✅ Waffle Strap with Beer Buckle: two-layer ankle strap with a cushioned waffle over a power strap, and ratchets with a bottle opener built in
✅ F.T.M. Ver. 5.0 toe strap and L-Guide: strong through the middle, flexible at the ends, and the tail tucks away so it does not drag in the snow
✅ Redux Lean Adjuster and Micro Adjuster: one-action forward lean with fine tuning of about 2.5 degrees per notch
✅ Slide Highback Rotation and Toolless Lever: change the highback angle without pulling screws, and set the binding up with no tools
✅ Adjustable Toe & Heel Cushion: match the cushions to your boot size and board width
✅ Super Transfer Baseplate with 4Corner Stabilizer: the high heel cup sits on a baseplate built to transfer power, and the stabilizer spreads that drive into the board for a sharper backside response
✅ UU Fit: the strap anchors between heel cup and highback to wrap the boot through 360 degrees for a natural, even hold
✅ Multi Disc: mounts on 4x4 or 2H patterns, with 5mm and 10mm offsets front to back and side to side
Best for: advanced riders who live for carving, big mountain lines and fast freeride laps, and want a precise, responsive snowboard binding to drive a stiffer board.
Built for Australian Conditions
Carving is what Aussie groomers are made for. On a firm morning at Perisher or Falls Creek, the raised heel cup and Buffalo Highback hold the edge when lesser bindings start to chatter. And when you take it to Hokkaido or Hakuba for the deep stuff, the Boost FootOn and Heel Up keep you driving through heavy snow and tight trees.
Setup Tips from the Shop
Set forward lean first: two or three Micro Adjuster notches is a good start for carving, then add more if you want an instant heelside. Use the Slide Highback Rotation to line the highback up with your heel edge. Centre your boot with the Adjustable Toe & Heel Cushions so toe and heel overhang are even. We will set it up for free when you buy in store.
Not for you if: you spend most days in the park or you are still learning to link turns. Browse our men's snowboard bindings and use the filters to find a softer, more forgiving freestyle binding in your size.
Spec Sheet
Model: Flux CV Snowboard Binding 2027 (26/27)
Riding style: Carving, big mountain, freeride (Flux)
Flex: Level 7 (Flux)
Highback: Buffalo Highback, Super Tough Nylon, Redux Lean Adjuster, Micro Adjuster, Slide Highback Rotation
Heel cup: 1.5cm higher than other Flux models
Baseplate: Super Transfer Baseplate, Performance Blend, 4Corner Stabilizer
Disc: Multi Disc (4x4 and 2H)
Strap system: UU Fit
Footbed: Boost FootOn, Heel Up, Adjustable Toe & Heel Cushion
Straps: Waffle Strap, F.T.M. Ver. 5.0, L-Guide
Buckles: Beer Buckle
Adjustment: Toolless Lever
Flux size chart (as stocked): M US 7 to 9.5, L US 9+
Colour: Offwhite
Sizes stocked: M (US 7-9.5), L (US 9+)
About Flux
Flux started in Japan in 1992 with one goal: build the best bindings for Japanese feet. That obsession with fit and feel never went away. Over three decades they have refined lighter, injection moulded straps, tool-free adjustment and some of the most comfortable footbeds on our wall, and today Flux is ridden in more than 25 countries. Plus, the buckles open a beer. Hard not to love that.
Why Buy from Twelve Board Store?
✔️ Free shipping Australia-wide on orders over $90
✔️ Melbourne flagship store at 435A Bridge Rd Richmond with expert advice and in-store setup
✔️ Authorised Flux dealer with full manufacturer warranty
✔️ Flexible payment options including Afterpay & Zip
✔️ Specialists in snow, skate and electric, 12 months a year
Shipping
FREE shipping Australia wide on this product. Orders are dispatched within 1–2 business days, with estimated delivery of 3–7 business days to metro areas and 5–10 business days to regional and remote locations. You will receive tracking details by email as soon as your order ships.
Returns
Enjoy 30-day change-of-mind returns on unused items in their original, undamaged packaging. Faulty or incorrectly supplied items are covered by a hassle-free replacement or full refund — just reach out and we will take care of it.
Warranty
Every product is backed by the full manufacturer's warranty against defects in materials and workmanship, in addition to your rights under the Australian Consumer Law. If anything goes wrong, contact our team at support@twelveboardstore.com.au and we will arrange assessment, repair, replacement or refund as appropriate.
Found it cheaper? We will beat any Australian authorised retailer price. Contact us at support@twelveboardstore.com.au.
Is this binding for you?
- Flex
- Medium
- Rider level
- Intermediate, Advanced
BINDINGS BUILTAROUND FIT
- 1992Flux starts out to fit Japanese feet
- 1999Jamie Lynn joins and Flux goes global
- 2000The Wing Highback launches
- 2003The VIPER, the first all over hydrographic pattern
- TodayDistributed in more than 25 countries

THE ALL ROUNDFLUX DS
- HighbackResistor, Super Tough Nylon
- BaseplateSuper Ultima with a cushion stabiliser
- DiscFlexible Disk
- StrapsCloud Strap and F.T.M. Duo toe strap
- SetupToolless Lever and Micro Adjuster
FROM OURFLUX WALL
-
Flux XF Snowboard Binding 2027 | Black
The Retro-Mod highback on a Super Ultima baseplate, for quick response and easy movement from park to carving and powder.
$699.99Ships next business day
-
Flux CV Snowboard Binding 2027 | Black
Flex level 7 with the Buffalo highback, built for carving, big mountain and freeride.
$749.99Ships next business day
-
Flux DS Women's Snowboard Binding 2027 | Pink
The all round DS with the Resistor highback and Cloud Strap, sized for smaller boots.
$779.99Ships next business day
FLUX FAQS
What size Flux binding do I need?
Will Flux bindings fit my board?
What is the Resistor highback?
Do I need tools to set up a Flux DS?
Can I pick up in store or return it?
Let customers speak for us
FAQ
Frequently asked
Probably not. Flux built the CV for carving, big mountain and freeride, and it shines when you're laying deep turns on firm groomers or charging fast laps. The raised heel cup and braced Buffalo Highback are all about edge hold and heelside power, not loose, playful park riding. It's also not the pick if you're still learning to link turns. If park is a big part of your riding, the Flux XF is the better all-rounder.
Set forward lean first: two or three Micro Adjuster notches is a good starting point for carving, with each notch roughly 2.5 degrees, then add more if you want an instant heelside. Use the Slide Highback Rotation to line the highback up with your heel edge without pulling screws. Centre your boot with the Adjustable Toe & Heel Cushion so toe and heel overhang are even. The Toolless Lever means you can tweak it all on the hill.
Flux rates both at flex level 7, but the CV is a specialist and the XF is the all-rounder. The CV has a heel cup 1.5cm higher than other Flux models, a Buffalo Highback with thicker bracing pillars this season, the Super Transfer baseplate, Boost FootOn and the new Heel Up pedal for backside turns. The XF runs the Retro-Mod highback and Super Ultima baseplate, built for park, carving and powder. Choose the CV for precision carving, the XF for everything.
Flux sizes the CV by US boot size: M fits US 7-9.5 and L fits US 9 and up, which are the sizes we've brought in this season. If your boot sits in the US 9-9.5 overlap, the outsole length and shape decide it. Check the size selector on this page, call us on 03 9421 2293, or bring your boots into our Richmond store for a test fit.



