Carver x Diné Skate Garden Surfskate Complete | C7 / 31.25"

Carver x Diné Skate Garden Surfskate Complete | C7 Raw 31.25"

Navajo art on a board that gives back.

This 31.25" x 9.875" board has a wider spooned nose and a big tail on a 17.5" wheelbase, balancing quick turns with a roomy, stable stance. On the C7 truck with 70mm Mag wheels it has a smooth, flowing surf feel.

Diné Skate Garden is a community skatepark project in Toadlena (Tóhaaliní), in the Two Grey Hills chapter of the Navajo Nation. The graphic is by Diné artist and surfskater Di'orr Greenwood, the 2022 Swirl Surfskate Fest champion, and every purchase of this model supports the skatepark project and young people in the Navajo Nation.

Key Features

• Spooned nose, big tail: 31.25" x 9.875" with a 17.5" wheelbase for a roomy, stable stance
• Diné Skate Garden collab: Navajo graphics by Di'orr Greenwood; every purchase supports the skatepark project
• Carver C7 surfskate trucks: the original 1996 surfskate truck. The C7 front truck sits on a pivoting swing arm that gives a smoother, longer, more flowing surf feel when you pump and carve, so it suits riders chasing a pure surf-training feel
• Roundhouse Mag 70mm 78a wheels: Carver's speed wheel: big, soft and grippy for fast pumping and rolling over rough footpaths
• Carver ABEC 7 Built-In bearings: smooth and fast, with built-in spacers
• Fully assembled and gripped: ready to ride

Specs

• Length: 31.25"
• Width: 9.875"
• Wheelbase: 17.5"
• Nose / tail: 3.25" / 6.5"
• Deck: 7-ply maple
• Shape: Wider spooned nose, big tail
• Front truck: Carver C7 front (swing arm), Raw
• Rear truck: Carver C2 rear
• Bushings: Carver C7 Smoke, 95a front / 89a rear
• Wheels: Carver Roundhouse Mag 70mm 78a Smoke, 47–48mm contact patch
• Bearings: Carver ABEC 7 Built-In
• Risers / hardware: 3/16" gaskets x2 (3/8" total), 1.25" hardware
• Best for: Everyday carving, pumping, cruising and the skatepark
• Collab: Diné Skate Garden

About Carver Skateboards

Carver Skateboards was founded in 1996 in Venice, California, by surfers Neil Stratton and Greg Falk. They wanted a board that felt like surfing on land, so they built the C7: a front truck on a pivoting swing arm that lets the board pump and carve like a surfboard on a wave. That truck started the surfskate category, and Carver calls it the original surfskate.

Around 2005 Carver added the CX, a lighter, snappier reverse-kingpin truck that became its most popular system. Three decades on, Carver still designs out of Culver City, California, and works with surf names like Channel Islands, ...Lost, Kai Lenny and Yago Dora. Surfers around the world use Carvers to train between sessions, and plenty of skaters ride them simply because carving a Carver is that much fun.

FAQs

What is a surfskate?
A surfskate is a skateboard with a special front truck that pivots and turns much further than a normal truck. That lets you pump the board (generate speed by twisting your body, like on a wave) and carve tight, surf-style turns without pushing. Surfers use them to train turns and timing on land, and skaters ride them for the flow. Carver's C7, released in 1996, is widely regarded as the original surfskate truck.

Is a 31.25" surfskate the right size for me?
At 31.25" this is a mid-size all-rounder. The 17.5" wheelbase gives a roomy, stable stance while still turning tight, so it suits most adult riders for pumping, carving, cruising and the skatepark. If you want the quickest, tightest turns, a 29"–30" board is snappier; for long, drawn-out carves, look at 32.5" and up.

Is this a good surfskate for beginners?
Yes, with one note. The C7 has a smoother, flowier surf feel than the CX and is still beginner-friendly, but if stability is your top priority the CX version is the more stable pick for first-timers. Start on flat, smooth ground, get comfortable carving, then start pumping. It feels loose at first, but most riders find their rhythm within a session or two.

What's the difference between Carver CX, C7 and C5 trucks?
CX is Carver's most popular truck: a reverse-kingpin design that's lighter, snappier and more stable at speed, so it's the best all-rounder and the one we recommend for most riders and for skateparks. C7 is the original 1996 swing-arm truck, with a smoother, longer, more flowing surf feel; riders chasing a pure surf-training feel often prefer it. C5 is compact and lower, with an 8.5" axle, made for smaller boards, kids and lighter riders. CX and C7 completes run a C2 rear truck, and C5 completes run a C4 rear.

Can I cruise or commute on it?
Yes, for short trips around the neighbourhood, to the beach or the shops. Once you can pump you'll cover flat ground with very little pushing. Surfskates are built for carving, so they feel looser than a cruiser at speed; for long, flat commutes a longboard or cruiser is more efficient. The soft 78a wheels soak up rough footpaths and cracks nicely.

Does it come ready to ride?
Yes. It arrives fully assembled with griptape, Carver trucks, wheels and ABEC 7 bearings installed. Just check the bushings feel right for your weight and go surf the street.

Why Buy From Twelve Board Store

• ✔️ Free shipping Australia-wide on orders over $90
• ✔️ Expert skate advice from real riders, 7 days a week
• ✔️ Easy returns for a hassle-free experience
• ✔️ Huge range of skate, snow & electric gear
• ✔️ Proudly Australian owned & operated

Surf the street. Carver since 1996.