How Step On Works

Step On uses a proprietary interface built into the binding and the boot sole. Three connection points engage simultaneously when you apply downward pressure with your foot — two heel clips at the back of the heel and a toe hook at the front. The connection is solid and secure with no movement between boot and binding. To release, you press the heel lever with your other boot or hand and step back. The whole process takes under two seconds in either direction once you've done it a handful of times.

The mechanical connection is genuinely secure — this is not a compromise on performance for convenience. Step On bindings are stiff enough for aggressive all-mountain and freeride riding, and the three-point connection transmits edge pressure efficiently in both heel and toe directions. Riders who switch to Step On consistently report that the lack of strap pressure across the top of the foot is one of the most immediate improvements they notice.

What You Need for Step On

Step On requires specific compatible boots — the interface hardware is built into the boot sole and cannot be added to a regular snowboard boot. Burton makes the full range of Step On compatible boots across men's and women's in soft through to stiff flex options. The system is exclusively Burton — no third-party manufacturers currently produce Step On compatible boots or bindings.

Step On bindings mount to boards via Burton's Channel system or standard 4x4 disc — compatible with all Burton boards and most non-Burton boards. Check compatibility before buying if you're running a non-Burton board.

Who Step On Suits

Step On works for a wide range of riders but has particular appeal for:

• Riders with bad knees or mobility limitations — eliminating the need to sit down and strap in on the snow is a meaningful quality-of-life improvement for anyone who finds that process difficult.
• Riders who do a lot of flat-to-lift transitions — resort riders who unclip frequently (traversing, getting to lifts, navigating flat sections) benefit most from the speed of Step On entry and exit.
• Families and groups — faster to get going, less time strapping in on a slope, easier for kids who struggle with conventional strap systems.
• Any rider tired of the strap routine — once you've ridden Step On for a day, going back to straps feels unnecessary.

Step On FAQ

Is Step On as secure as regular bindings? Yes — the three-point connection is rigid and secure. No movement between boot and binding. Tested across all terrain from groomed runs to off-piste and freeride.

Do I need specific boots for Step On? Yes — Step On requires Burton Step On compatible boots. The interface is built into the boot sole and is not compatible with regular snowboard boots.

Does Step On work with non-Burton boards? Yes — Step On bindings mount via standard disc to most boards. Check your board's mounting pattern before purchasing.

Can I try Step On before buying? Yes — come into our Richmond store. We'll put you in the boots and let you step in and out of the binding so you understand how it feels before you commit to the purchase.

Is Step On good for beginners? Yes — easier to get in and out than traditional bindings, which reduces the frustration of the learning phase significantly.

Is Step On worth the extra cost? For riders who meet any of the criteria above — yes. The convenience is not marketing language. Come in and try it.

Burton Step On Boots  ·  All Bindings  ·  Burton  ·  What Is Burton Step On?  ·  Step On — Is It Worth It?  ·  Bindings Buying Guide