Carver Enigma Surfskate Complete | C7 / 31.75"

Carver Enigma Surfskate Complete | C7 Impala Blue 31.75"

Old soul. New lines.

The Enigma draws on 1980s skateboard shapes but uses a modern double-kick mould, which turns a retro look into a capable performance board for bowls, parks and street.

It wears an octopus graphic on a blacked-out wood veneer. On the C7 swing-arm truck in Impala Blue with 65mm Roundhouse Slicks, it has a smoother, more drawn-out surf feel through each turn.

Key Features

• Double-kick mould: modern kicks on both ends
• Retro shape: 1980s-inspired outline
• Octopus graphic: on a blacked-out wood veneer
• Carver C7 surfskate trucks: the original 1996 surfskate truck. The C7 front truck rides on a pivoting swing arm for a smoother, longer, more flowing surf feel when you pump and carve, which is why riders chasing a pure surf-training feel often prefer it
• Roundhouse Slicks 65mm 83a wheels: a smaller, firmer wheel with a slick riding surface for a looser, more playful feel
• Carver ABEC 7 Built-In bearings: smooth and fast, with built-in spacers
• Fully assembled and gripped: ready to ride

Specs

• Length: 31.75"
• Width: 9.75"
• Wheelbase: 15.75"
• Deck: 7-ply maple
• Shape: 1980s-inspired outline, double-kick mould
• Front truck: Carver C7 front (swing arm), Impala Blue
• Rear truck: Carver C2 rear
• Bushings: Carver C7 Standard Smoke, 95a front / 89a rear
• Wheels: Carver Roundhouse Slicks 65mm 83a White
• Bearings: Carver ABEC 7 Built-In
• Risers / hardware: 3/16" gaskets x2 (3/8" total), 1.25" hardware
• Best for: Bowls, parks and street, retro style with modern performance

About Carver Skateboards

Carver Skateboards was founded in 1996 in Venice, California, by surfers Neil Stratton and Greg Falk. They wanted a board that felt like surfing on land, so they built the C7: a front truck on a pivoting swing arm that lets the board pump and carve like a surfboard on a wave. That truck started the surfskate category, and Carver calls it the original surfskate.

Around 2005 Carver added the CX, a lighter, snappier reverse-kingpin truck that became its most popular system. Three decades on, Carver still designs out of Culver City, California, and works with surf names like Channel Islands, ...Lost, Kai Lenny and Yago Dora. Surfers around the world use Carvers to train between sessions, and plenty of skaters ride them simply because carving a Carver is that much fun.

FAQs

What is a surfskate?
A surfskate is a skateboard with a special front truck that pivots and turns much further than a normal truck. That lets you pump the board (generate speed by twisting your body, like on a wave) and carve tight, surf-style turns without pushing. Surfers use them to train turns and timing on land, and skaters ride them for the flow. Carver's C7, released in 1996, is widely regarded as the original surfskate truck.

Is a 31.75" surfskate the right size for me?
At 31.75" the Enigma gives you plenty of deck for your feet on a fairly tight 15.75" wheelbase, so it stays quick and snappy in bowls, parks and on the street. It suits most adult riders. If you want long, drawn-out carves, look at a 32.5" board with a longer wheelbase; kids and very light riders may prefer a 28" or shorter.

Is this a good surfskate for beginners?
Yes, with one note. The C7 swing-arm truck gives a smoother, flowier surf feel and is still beginner-friendly, but the CX is Carver's most stable and predictable truck, so if you're brand new and want the easiest start, the CX version is the more stable pick. Start on flat, smooth ground, get comfortable carving, then start pumping. Most riders find their rhythm within a session or two.

What's the difference between Carver CX, C7 and C5 trucks?
CX is Carver's most popular truck: a reverse-kingpin design that's lighter, snappier and more stable at speed, so it's the best all-rounder and the one we recommend for most riders and for skateparks. C7 is the original 1996 swing-arm truck, with a smoother, longer, more flowing surf feel; riders chasing a pure surf-training feel often prefer it. C5 is compact and lower, with an 8.5" axle, made for smaller boards, kids and lighter riders. CX and C7 completes run a C2 rear truck, and C5 completes run a C4 rear.

Can I cruise or commute on it?
Yes, for short trips around the neighbourhood, to the beach or the shops. Once you can pump you'll cover flat ground with very little pushing. Surfskates are built for carving, so they feel looser than a cruiser at speed; for long, flat commutes a longboard or cruiser is more efficient. The 65mm 83a Slick wheels are a touch firmer than Carver's 78a wheels, so they roll best on smoother footpaths and paths.

Does it come ready to ride?
Yes. It arrives fully assembled with griptape, Carver trucks, wheels and ABEC 7 bearings installed. Just check the bushings feel right for your weight and go surf the street.

Why Buy From Twelve Board Store

• ✔️ Free shipping Australia-wide on orders over $90
• ✔️ Expert skate advice from real riders, 7 days a week
• ✔️ Easy returns for a hassle-free experience
• ✔️ Huge range of skate, snow & electric gear
• ✔️ Proudly Australian owned & operated

Surf the street. Carver since 1996.