Paris V3 180mm 50° Trucks | Tiffany

Paris V3 180mm 50° Trucks | Tiffany

Deep carves, lively response. The freeride all-rounder.

The Paris V3 180mm 50° is Paris's classic reverse-kingpin longboard truck, here in Tiffany. The 50° baseplate turns quickly and carves deep, so it suits cruising, carving, freeride and everyday longboarding on full-size decks.

The V3 uses a new alloy forming process with true T6 heat treatment, a stronger redesigned hanger and a lighter, reinforced baseplate. Improved 90a conical bushings and 96a hand-poured pivot cups give a smooth, predictable lean with a clean return to centre. Ride height matches the 43° V3, so you can mix the two for a split-angle setup.

Key Features

• 50° baseplate: quick turn-in and deep, surfy carves
• 180mm hanger: suits most full-size longboards around 9"–10"
• T6 heat-treated V3 alloy: stronger hanger, lighter reinforced baseplate
• Improved 90a bushings: redesigned conical shape for smooth, even lean
• 96a hand-poured pivot cups: tight, slop-free pivot
• Split-angle ready: same ride height as V3 43° for mix-and-match setups

Specs

• Hanger width: 180mm (7")
• Axle width: 245mm (9.6")
• Baseplate angle: 50°
• Axle height: 65mm
• Kingpin: Reverse kingpin, SCM435 alloy steel
• Axle: SCM440 alloy steel
• Bushings: Paris 90a conical
• Pivot cups: 96a hand-poured urethane
• Weight: About 462g per truck
• Finish: Tiffany
• Best for: Carving, cruising, freeride, all-round longboarding
• Sold as: Pair (2 trucks)

What Size Board Does It Fit?

As a general rule, longboard trucks suit decks within about 1/2" either side of the axle width. Paris V3 trucks come in three hanger widths, and the 180mm suits most full-size longboards.

Between sizes? Go narrower for quicker, more responsive turning, or wider for more stability and leverage.

About Paris Truck Co.

Paris Truck Co. started in California in the mid-2000s, building precision longboard trucks at a time when riders had few good options. Its reverse-kingpin V-series trucks quickly became a go-to for carving, freeride and downhill, and the V3 is the latest evolution of that design.

Today Paris is known for smooth, predictable turn, strong cast hangers and a huge colour range, plus the Street truck for skaters who want that same feel on a traditional kingpin. Riders choose Paris because the trucks do exactly what they should, every session, without needing to be babied.

FAQs

What size board do the Paris V3 180mm 50° trucks fit?
Boards about 9" to 10" wide. The 245mm (9.6") axle lines up with the rails of most full-size longboards. For narrower decks under 9", look at the 150mm or 165mm V3.

What's the difference between Paris V3 50° and 43°?
The 50° turns more for the same amount of lean, so it feels lively and carvy, ideal for cruising and freeride. The 43° turns less and feels more planted at speed, which suits downhill and fast freeride. Both share the same ride height, so you can run 50° front and 43° rear for a split setup.

How tight should I set my Paris trucks?
Start with the kingpin nut just snug so the bushings are lightly compressed, then ride and adjust a quarter turn at a time. Tighter feels more stable at speed; looser turns more. If you need to crank them right down, try harder bushings instead.

Do I need risers with Paris V3 180mm trucks?
On drop-through and most top-mount boards with wheel wells, wheels up to about 70mm usually run without risers. For bigger wheels (70–75mm+), a loose setup or decks without wheel wells, add a 1/8" to 1/4" riser to stop wheelbite.

Do these come as a pair?
Yes. You get two complete trucks, enough for one board. Bearings, wheels and mounting hardware are sold separately.

Why Buy From Twelve Board Store

• ✔️ Free shipping Australia-wide on orders over $90
• ✔️ Expert skate advice from real riders, 7 days a week
• ✔️ Easy returns for a hassle-free experience
• ✔️ Huge range of skate, snow & electric gear
• ✔️ Proudly Australian owned & operated

Smooth turn. Solid hold. Ride Paris.