Caliber Forty Four V2 Trucks | Stone Sapphire Blue

Caliber Forty Four V2 Trucks | Stone Sapphire Blue

Built for speed. Refined for precision.

The Caliber Forty Four V2 is Caliber's speed-focused reverse-kingpin truck, the second-generation Caliber II, here in Stone Sapphire Blue. The lower 44° baseplate turns less for the same lean, giving a calm, stable ride at speed. It suits downhill, fast freeride and riders who want a planted board.

The V2 was rebuilt for tighter tolerances: a bigger inner bushing step for more rebound, a perfectly round outer step that fits aftermarket bushings without slop, a snugger pivot and a pressed-in Grade 8 hex-head kingpin. A new in-house heat treatment makes the trucks up to 40% stronger, and the baseplate is thickened toward the kingpin for high-speed impacts.

Key Features

• 44° baseplate: stability and control at speed
• 184mm hanger, 10" axle: standard size for full-size longboards
• Updated bushing seat: bigger inner step for rebound, perfectly round outer step for a no-slop fit
• Redesigned pivot: reduced chamfer for a snug, play-free pivot cup
• Pressed-in Grade 8 kingpin: hex head, no spin or slop
• Up to 40% stronger: new in-house heat treatment and reinforced baseplate
• Thinner powder coat: keeps tolerances tight

Specs

• Hanger width: 184mm (7.25")
• Axle width: 10" (axle to axle)
• Baseplate angle: 44°
• Kingpin: Reverse kingpin, pressed-in Grade 8 hex head
• Bushings: 89a Blood Orange barrels
• Material: Heat-treated cast aluminium
• Weight: About 490g per truck
• Finish: Stone Sapphire Blue
• Best for: Downhill, fast freeride, stable cruising
• Sold as: Pair (2 trucks)

What Size Board Does It Fit?

As a general rule, longboard trucks suit decks within about 1/2" either side of the axle width. Caliber II trucks come in two sizes, and these are the 10" (184mm hanger) for full-size longboards.

The 10" is the standard longboard size and fits most drop-through and top-mount longboards.

About Caliber Truck Co.

Caliber Truck Co. was founded in California in 2010 with one goal: make a cast longboard truck that rides with the precision of something far more expensive. The original Caliber quickly became a favourite for freeride and cruising.

The Caliber II, sold as the Fifty and Forty Four V2, refined every contact point: a tighter bushing seat, a snugger pivot, a pressed-in Grade 8 kingpin and a heat treatment Caliber says makes the trucks up to 40% stronger. Riders choose Caliber for a truck that turns smoothly, holds a line and stays slop-free for years.

FAQs

What size board do the Caliber Forty Four V2 10" trucks fit?
Boards about 9.5" to 10.5" wide, which covers most full-size longboards. The 10" axle and 184mm hanger line up with wide decks. For narrower boards, Caliber also makes a 9" (160mm) size.

Should I get the Caliber Forty Four or Fifty?
The Forty Four (44°) is the speed truck: stable and predictable when you're going fast, ideal for downhill and fast freeride. The Fifty (50°) turns more and suits cruising and carving. Many riders run a Fifty front and Forty Four rear.

Can I swap the bushings?
Yes. The V2's outer bushing step is a perfect circle, so standard and oversized aftermarket barrels and cones fit without slop. Go softer for lighter riders or more turn, harder for heavier riders or more stability.

Do I need risers with Caliber trucks?
On drop-through boards and decks with wheel wells, wheels up to about 70mm usually need no risers. With 70–75mm+ wheels, loose bushings or flat top-mount decks, add a 1/8" to 1/4" riser to avoid wheelbite.

Do these come as a pair?
Yes. You get two complete trucks, enough for one board. Bearings, wheels and hardware are sold separately.

Why Buy From Twelve Board Store

• ✔️ Free shipping Australia-wide on orders over $90
• ✔️ Expert skate advice from real riders, 7 days a week
• ✔️ Easy returns for a hassle-free experience
• ✔️ Huge range of skate, snow & electric gear
• ✔️ Proudly Australian owned & operated

Precision you can feel. Caliber since 2010.