Burton [ak] GORE‑TEX 3L Kimmy Bib Pant (2026, Blue Teal)
Powder-hungry but weather-wise — the Kimmy 2L Bib keeps you dry, free, and always in control.
Overview
The Burton [ak] Kimmy GORE‑TEX 2L Bib Pant delivers a perfect balance of protection and movement for riders who demand both style and function. With a two-layer waterproof shell, progressive venting, and rider-inspired features, this bib is built for long days in the backcountry or technical resort laps. Gear that doesn’t get in your way — it rides with you.
Key Features & Tech
-
GORE‑TEX 2‑Layer Shell – Waterproof, windproof, breathable — shell only, letting you layer heat as you need.
-
Mapped Living Lining® – Interior taffeta + mesh zones optimize moisture management without bulk.
-
Fully Taped Seams (GORE‑SEAM®) – Every seam sealed to maintain water integrity.
-
Crossflow Venting™ / Inner & Outer Thigh Vents – Dual vents allow aggressive air dump when the work rate spikes.
-
Articulated Patterning & Stretch Back Panel – Pre-curved fit, enhanced mobility at the knees, and stretch where you need it.
-
Drop‑Seat / Zippered Relief Access – Take care of business without full pant removal.
-
Adjustable Elastic Suspenders + Waist Panel – Fine-tuned fit for layering and dynamic motion.
-
YKK® Water‑Resistant Zippers – External zippers engineered to resist water ingress.
-
Utility Pockets + Beacon Loop
• Chest pockets include beacon clip and internal media sleeve.
• Zippered handwarmer pockets, cargo compartments, and stretch device pocket. -
Anti‑Scuff Cuffs & Cuff Elevators – Reinforced lower legs for abrasion resistance, adjustable lift to prevent dragging.
-
Reinforced Kick / Ankle Panels – Tough build in boot contact zones.
-
Reflective Details – Subtle visibility in low light.
-
Bluesign® Approved & PFC‑Free DWR – Responsible materials and finishes.
-
Relaxed / Regular Fit – Room to move with intentional shaping.
-
Lifetime Warranty – Built-in longevity backed by Burton.
Fit + Ride Tip
This bib runs relaxed / performance-articulated—enough room to layer without blowing out the silhouette. If you stack bulky mid- or insulating layers, or want extra freedom in the thighs, size up.
Ride Tip: Assume your riding stance (knees bent, weight forward). If you feel tension in the hips, lower back, or thighs while crouched, that’s your signal to go one size larger. The suspenders and waist adjustments let you fine-tune once you're suited up.
Size Guide
| Size | Waist (cm / in) | Inseam (approx.) |
|---|---|---|
| XS | ~ 74 – 79 cm / 29 – 31 in | ~ 83 cm / 32.5 in |
| S | ~ 79 – 84 cm / 31 – 33 in | ~ 83 cm / 32.5 in |
| M | ~ 84 – 89 cm / 33 – 35 in | ~ 83 cm / 32.5 in |
| L | ~ 89 – 94 cm / 35 – 37 in | ~ 83 cm / 32.5 in |
| XL | ~ 94 – 102 cm / 37 – 40 in | ~ 83 cm / 32.5 in |
| XXL | ~ 102 – 112 cm / 40 – 44 in | ~ 83 cm / 32.5 in |
How to Measure:
• Waist: Measure at your natural waistline (above hips).
• Inseam: From crotch to floor (or desired cuff drop) — measure in boots for best accuracy.
If you hover between sizes or plan to layer bulkier gear, scale up.
Care & Maintenance
-
Fasten all zippers, flaps, suspenders, and drop‑seat closures before washing.
-
Use a technical gear cleaner (no softeners, bleach, or regular laundry detergents).
-
Wash cold or warm on gentle cycle.
-
Rinse thoroughly to remove residue.
-
Tumble dry low/medium (if allowed) — heat helps restore DWR finish.
-
Reapply DWR periodically (spray‑in or wash‑in) to maintain bead performance.
-
Spot-clean stains quickly — avoid aggressive scrubbing on seams or membrane faces.
-
Store dry, loosely, and ventilated — don’t compress while damp.
-
Repair small abrasions early with GORE repair tape or patch kits before damage spreads.
Why Choose Twelve Board Store?
✔ Free & Fast Shipping In Oz On Orders Over $90
✔ Melbourne showroom with expert staff & advice
✔ Premium gear, huge range curated for all riders
✔ Year-round support — we ride what we sell
...
