K2 Maysis Men's Snowboard Boot 2027 | White

K2 Maysis Men's Snowboard Boot 2027 | White

White K2 Maysis 2027: Dialled Conda Fit and Mid-Stiff Response, Bright Finish.

Want the Maysis fit but a look that stands out? The White K2 Maysis gives you K2's best-known men's snowboard boot in a bright, clean colour. It's the 2027 model, rated 7/10 on K2's flex scale, with a heat mouldable Intuition liner, Conda internal lacing powered by BOA and Endo 3.0 construction.

What you notice on snow is how locked in your heel feels. Conda draws it back into the pocket, the BOA Fit System powered by H5 snugs up the shell, and the articulating cuff lets you flex forward smoothly. Harshmellow in the insole and midsole softens the impact of hard landings, and HDR Premium Synthetics keep the upper tough. The White colourway is bright and crisp, and turns heads on the chairlift.

The Tech and What It Does on the Hill

✅ Intuition Control Foam 3D liner: heat mouldable medium and high-density foam that forms to your leg, ankle and foot for a warmer, more precise fit
✅ Conda internal lacing powered by BOA: K2's liner fit system pulls your heel back into the pocket and hugs your ankle while still flexing naturally
✅ BOA Fit System powered by H5 with TX3 lace: fast, even shell tension you can fine tune in small clicks
✅ Endo 3.0 heel counter: keeps the boot's flex consistent over its life
✅ Articulating upper cuff: smooth forward flex without the shell buckling when you bend your knees
✅ Internal and external J-bars: extra structure around the ankle to cut heel lift
✅ S'Cafe coffee mesh: a liner layer that helps control odour and absorb moisture
✅ Harshmellow Plus insole: dual-density EVA with Harshmellow in the heel pocket to soften big landings
✅ HDR Premium Synthetics and reinforced rubber toe: a tough upper that K2 says is eight times more durable than standard polyurethane, plus abrasion resistance at the toe
✅ This Grips! rubber outsole with Harshmellow damping: a dual-density EVA and Harshmellow midsole to soak up landings and grip on icy car parks

Best for: intermediate to advanced riders who want one dialled, mid-stiff snowboard boot for all-mountain laps, freeride, freestyle and powder days.

Built for Australian Conditions

On a typical day at Thredbo you'll want support on icy morning runs and comfort when the afternoon sun turns the snow to slush. The Maysis's 7/10 flex delivers both. It's stiff enough to hold an edge on hard groomers and through refrozen chop at Buller or Hotham, and still flexible enough for the park. For a Japan or Canada trip, the warm liner and dependable fit make long powder days a lot more comfortable.

Setup Tips from the Shop

Fit the boot with one thin pair of riding socks. Snug the Conda internal lacing first to set your heel in the pocket, then dial the outer BOA to firm but not crushing, and back it off a few clicks on the chairlift. Your toes should just brush the end when standing and pull back as you flex your knees. Heat moulding is free when you buy in store, and it makes a big difference to how quickly the Intuition liner settles to your foot. Book a free boot fitting and we'll check the size with you.

Not for you if: you're looking for an entry-level soft boot or a very stiff, aggressive freeride boot. Browse our men's snowboard boots and use the filters to compare flex in your size.

Spec Sheet

Lacing system: BOA Fit System powered by H5, TX3 BOA lace, Conda internal liner lacing powered by BOA (K2 lists H5 and M+2)
Flex: K2 rating 7/10 (playful to precise scale)
Liner: Intuition Control Foam 3D (heat mouldable), S'Cafe coffee mesh, internal and external J-bars
Insole: Harshmellow Plus (dual-density EVA)
Outsole: This Grips! rubber outsole with Harshmellow damping, dual-density EVA and Harshmellow midsole
Construction: Endo 3.0 heel counter, articulating upper cuff, HDR Premium Synthetics, reinforced rubber toe
Colour: White
Sizes stocked: US 9, US 10, US 11

FAQs

Does the K2 Maysis run true to size?
Fit depends on your foot shape, so we never assume. Start with the size you usually ride and try them on with thin socks. Our boot fit guide walks you through it, or book a free fitting at 435A Bridge Rd Richmond or call 03 9421 2293.

Will a white snowboard boot stay clean?
White shows dirt more than black, but a wipe down with a damp cloth after riding keeps it looking fresh. The HDR Premium Synthetics upper is built to be tough.

Can the K2 Maysis be heat moulded?
Yes. The Intuition Control Foam 3D liner is heat mouldable, and we do it for free when you buy the boots in store.

Is the K2 Maysis good for freestyle?
K2 builds it to cover freeride, all-mountain, freestyle and powder. At 7/10 flex it's supportive but not rigid, so it works in the park as well as on the rest of the mountain.

About K2

K2 started in Washington State in 1962 and calls itself the original American ski and snowboard brand. More than 60 years on, freeride is still at the core of what it builds, and its boot range is where a lot of the fit thinking shows up: Intuition foam liners, BOA Fit Systems, K2's own Endo construction and Harshmellow damping, all built around getting your foot comfortable and locked in.

Why Buy from Twelve Board Store?

✔️ Free shipping Australia-wide on orders over $90
✔️ Melbourne showroom at 435A Bridge Rd Richmond with professional boot fitting
✔️ Free heat moulding on heat-mouldable boots purchased in store
✔️ Authorised K2 dealer with full manufacturer warranty
✔️ Flexible payment options including Afterpay & Zip
✔️ Specialists in snow, skate and electric, 12 months a year