Burton [ak] GORE‑TEX Cyclic 2L Men’s Jacket 2026 — Very Berry
Product Overview
A top‑tier shell built for riders who demand elite weather protection without bulk. The 2026 Burton [ak] GORE‑TEX Cyclic 2L Jacket blends serious technical performance with a sharp, down‑to‑ride aesthetic — ideal for storm‑punching lines or shredding in unpredictable alpine conditions. This is snowboard outerwear for the rider who refuses to back down.
Key Features & Technology
-
GORE‑TEX 2‑Layer Membrane — waterproof, windproof and breathable; the membrane is bonded to the face fabric to maintain a sleek shell structure while letting internal liners breathe.
-
Fully Taped Seams / GORE‑SEAM Tape — all critical seams sealed to prevent ingress of snow or water.
-
StormForm Fulltime Contour™ Hood — helmet‑compatible, with embedded cinch adjustment and hood length control for optimal coverage and vision.
-
Mesh‑Lined No‑Snag Pit Zip Vents — underarm zips that dump heat rapidly without catching on layers.
-
Ergonomic Stretch Zip‑Out Waist Gaiter with Jacket‑to‑Pant Interface — seals out snow at the waist, removable for customization.
-
No‑Lift Underarm Gussets — engineered cut that keeps the shell from riding up when arms are raised.
-
200D Durability Side Panels — reinforced panels in high‑wear zones to resist abrasion.
-
YKK® Water‑Resistant Zippers — durable zip hardware throughout shell.
-
Internal Lining: Living Lining® + Soft Taffeta & Closed Cell Mesh — mapped liner structure that responds to body temperature and supports internal moisture movement.
-
Pocket Arsenal
• Zip chest pocket
• Zip bicep / pass pocket
• Microfleece handwarmer pockets
• Interior power mesh dump pocket
• Zippered media/goggle pocket with a Therma‑Pocket to keep electronics from freezing -
Performance Patterning / Articulated Fit — cutlines and shaping designed around natural body flex for riding and movement.
-
Sustainability / Approvals — uses Bluesign®‑approved materials where possible to reduce environmental impact.
-
Lifetime Warranty — backed by Burton’s repair/replacement policy.
Why It’s Premium
This isn’t just a shell — it’s a performance instrument. From the GORE‑TEX membrane to the nuanced liner mapping and reinforced panels, every inch is engineered. The tech is real, not buzz. The materials are high-end. The design is precise. Riders investing in this jacket expect it to perform season after season — and Burton backs it.
Fit Tip & Style Notes
-
The fit is regular articulated — not overly slim, not baggy, with shaping for mobility.
-
If you prefer layering heavy midlayers or insulating pieces, sizing up may give you extra breathing room.
-
For a sleek silhouette or for street-to-mountain blending, your usual size will often work best.
-
Riders with long torsos or arms may prefer sizing up to ensure length.
-
The articulated patterning allows for natural movement; don’t let slightly longer sleeves off the hanger change your perception.
Size Guide
| Measurement | How to Measure | Sample Size Ranges* |
|---|---|---|
| Chest | Measure around the broadest part of chest, arms relaxed | XS 86–93 cm / S 93–99 / M 99–104 / L 104–109 / XL 109–117 / XXL 117–127 cm (based on Burton outerwear chart) |
| Natural Waist | Around relaxed waistline | Match to your typical pant / jacket waist sizes |
| Hips | Around fullest part of hips | Should align with outerwear hip bands |
| Sleeve / Arm Length | From center of back at neck, across shoulder to wrist | Ensure sleeve reaches your wrist in a forward riding position |
* These ranges are drawn from typical Burton outerwear charts and retailer specs for AK Cyclic variants.
Fit Checklist
-
With arms raised, jacket hem should not lift excessively
-
Zip fully and move through dynamic stretches (twists, squats)
-
The hood should remain functional with your helmet
-
Pockets should align comfortably with hand position when strapped in
Care Guide
-
Use a technical wash (no fabric softener) designed for waterproof gear (e.g. Nikwax Tech Wash, Grangers).
-
Secure all zippers, velcro and flaps, and wash on a warm, gentle cycle.
-
Rinse thoroughly to remove soap residue that can clog membranes.
-
Reactivate DWR (Durable Water Repellent) by tumble‑drying low or using a dryer with a clean tennis ball — heat helps restore water beading.
-
If water starts soaking rather than beading, apply a spray-on or wash-in DWR treatment.
-
Spot-clean stains gently (soft sponge, mild soap), avoid aggressive scrubbing over membrane zones.
-
Always store fully dry — never fold wet or damp — and avoid long‑term compression in tight spaces.
-
Address small injuries (tears, seam delamination) early using repair patches or seam sealer.
Why Choose Twelve Board Store?
✔ Free & Fast Shipping In Oz On Orders Over $90
✔ Melbourne showroom with expert staff & advice
✔ Premium gear, huge range curated for all riders
✔ Year-round support — we ride what we sell
...
