Burton [ak] Acamar GORE‑TEX PRO 3L Bib Pant (2026, True Black)
Hook / Headline
“Zero compromise. Maximum shred. The Acamar 3L Bib is your fortress when the storm hits hard — built for riders who demand more than just weather resistance.”
Overview / Hero Copy
When you’re busting through deep snow, traversing steep skin tracks, or charging heli lines, the Burton [ak] Acamar GORE‑TEX PRO 3L Bib is the lower-body shell built to match your ambition. With top-tier GORE‑TEX PRO durability, smart venting, stretch panels, and ride‑tuned features, it’s the kind of shell you depend on when conditions turn nasty. Don’t just endure — dominate.
Key Features & Tech
-
GORE‑TEX PRO 3‑Layer Construction – Built to endure the harshest elements while maintaining breathability.
-
Fabric Blocking: Stretch Upper + Rugged Lower
• Upper: GORE‑TEX C‑Knit™ Stretch 3L Nylon 30D plain weave
• Lower: GORE‑TEX RGD Pro 3L Nylon 80D plain weave -
Fully Taped Seams / GORE‑SEAM® Tape – All seams sealed to prevent leaks.
-
Ventilation / Crossflow Venting™ – Exterior thigh vents plus continuous inner thigh vents for aggressive heat dump.
-
Articulated Patterning & Stretch Back Panel – Pre-curved cut and flexible fabric where you need it for unrestricted movement.
-
Adjustable Suspenders + Internal Waist Adjustment – Customizable fit even when wearing multiple layers.
-
RECCO® Reflector – Built-in safety tech for search and rescue visibility.
-
Reinforced Kick Panels / Anti‑Scuff Cuffs – Durability where you bash your boots, bindings, or crampons.
-
Zippered Drop‑Seat – Smart backcountry relief access — no full takedown needed.
-
Utility Webbing / Gear Loops – Secure carry points for tools or gear attachments.
-
Kinetic Garment Construction & Triple-Stitched Seams – Strategic reinforcement where it matters most.
-
YKK® Water-Resistant Zippers – Reliable protection from wind and water intrusion.
-
Beacon-Compatible Mesh Pockets – Integrated gear loops and power-mesh compartments to secure avy essentials.
-
Relaxed / Regular Articulated Fit – Balanced for movement and layering.
-
Lifetime Warranty – Built to last and backed by Burton.
Fit + Ride Tip
This bib runs in a relaxed articulated fit — plenty of mobility without being bulky. If you’re layering with heavy midlayers or down pants underneath, size up for max comfort.
Fit Tip: Drop into your natural stance (knees bent, torso flexed). If it feels snug at the thighs or hips, or pulls through the back panel — go up a size. The stretch zones and cinch waist give you freedom to adjust once you’re dialed in.
Size Guide
Size | Waist (cm / in) | Inseam (approx.) |
---|---|---|
XS | 74 – 79 cm / 29 – 31 in | 83 cm / 32.5 in |
S | 79 – 84 cm / 31 – 33 in | 83 cm / 32.5 in |
M | 84 – 89 cm / 33 – 35 in | 83 cm / 32.5 in |
L | 89 – 94 cm / 35 – 37 in | 83 cm / 32.5 in |
XL | 94 – 102 cm / 37 – 40 in | 83 cm / 32.5 in |
XXL | 102 – 112 cm / 40 – 44 in | 83 cm / 32.5 in |
*These are based on Burton’s regular fit. Inseam may vary slightly with stretch.
To measure:
Waist: Natural waist, above the hipbone.
Inseam: From crotch to base of boot (or desired cuff drop).
When in doubt — go bigger and cinch it down.
Care Guide
Your GORE‑TEX PRO shell is a high-performance tool. Treat it like one.
How to Wash + Maintain:
-
Zip and secure all openings, flaps, suspenders, and the drop seat.
-
Wash using a tech-specific detergent (like Nikwax or Grangers). Avoid standard detergent, bleach, or softeners.
-
Use cold or warm water, gentle cycle.
-
Rinse thoroughly.
-
Tumble dry low to medium — heat helps restore the water-repellent DWR coating.
-
After 3–5 washes, reapply DWR using spray-in or wash-in waterproofing products.
-
Spot clean gnarly dirt early — don’t let grime embed.
-
Store it dry, uncompressed, and out of direct sun.
-
Small rips? Use Gore‑Tex repair tape or patch kits before they grow.