{"product_id":"shortys-bolts-phillips-1-1-4","title":"Shorty's Bolts Phillips | 1 1\/4\"","description":"\u003ch3\u003eShorty's Bolts Phillips | 1 1\/4\"\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eLonger Shorty's bolts for setups running risers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eShorty's 1 1\/4\" Phillips hardware is the bolt set for boards running 1\/8\" riser pads. It mounts one set of trucks to one deck, and the Phillips head means any screwdriver will do the job.\u003c\/p\u003e\n\n\u003cp\u003eShorty's bolts are half threaded to resist bending and breaking, and they're made to set lengths so you're not left with bolt sticking way past the nut. The smaller countersinking head is lighter and causes less damage to the deck when you tighten it, which helps prevent cracks around the holes.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 1\/4\" length:\u003c\/strong\u003e right for 1\/8\" riser pads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhillips head:\u003c\/strong\u003e use any screwdriver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf threaded:\u003c\/strong\u003e resists bending and breaking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmaller countersinking head:\u003c\/strong\u003e lighter and gentler on your deck\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow profile nuts:\u003c\/strong\u003e neat finish under the baseplate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull board set:\u003c\/strong\u003e 8 bolts and 8 nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 1 1\/4\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead type:\u003c\/strong\u003e Countersunk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e Phillips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCount:\u003c\/strong\u003e 8 bolts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e 8 low profile nuts and a sticker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool needed:\u003c\/strong\u003e Phillips screwdriver and 3\/8\" nut driver or skate tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAbout Shorty's\u003c\/h3\u003e\n\u003cp\u003eShorty's is a California hardware brand, founded in 1991 by Tony Buyalos and April Hamrick around one simple idea: deck bolts that are the right length. It later ran a deck program with a team that included Chad Muska and Peter Smolik, before stepping back from decks in 2006 to focus on hardware.\u003c\/p\u003e\n\u003cp\u003eToday Shorty's is best known for its deck bolts and bushings. Its bolts are half threaded to resist bending and snapping, and they use a smaller countersinking head that puts less stress on your deck. It is simple hardware done properly, which is why so many shops and skaters keep a set in the bag.\u003c\/p\u003e\n\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat length bolts do I need?\u003c\/strong\u003e\u003cbr\u003e\nFor a standard deck with no risers, 7\/8\" or 1\" is right. Add 1\/8\" risers and go to 1.25\". Bigger risers or thick decks need 1.5\" or longer. You want the bolt to come through the nut fully without sticking out far past it.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAllen or Phillips bolts?\u003c\/strong\u003e\u003cbr\u003e\nAllen bolts use a hex key, which grips better and is less likely to strip, and most skate tools have one built in. Phillips bolts use a screwdriver, which is easy to find anywhere. This set is Phillips.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow many bolts are in a pack? Is it enough for one board?\u003c\/strong\u003e\u003cbr\u003e\nYes. You get 8 bolts and 8 low profile nuts, enough to mount two trucks to one deck.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill 1 1\/4\" bolts work without risers?\u003c\/strong\u003e\u003cbr\u003e\nThey'll work, but they may poke out past the nut on a standard deck. Without risers, 7\/8\" or 1\" is a cleaner fit.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Buy From Twelve Board Store\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e✔️ Free shipping Australia-wide on orders over $90\u003c\/li\u003e\n\u003cli\u003e✔️ Expert skate advice from real riders, 7 days a week\u003c\/li\u003e\n\u003cli\u003e✔️ Easy returns for a hassle-free experience\u003c\/li\u003e\n\u003cli\u003e✔️ Huge range of skate, snow \u0026amp; electric gear\u003c\/li\u003e\n\u003cli\u003e✔️ Proudly Australian owned \u0026amp; operated\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eShorty's. Hardware done right.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"What length bolts do I need?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"For a standard deck with no risers, 7\/8\\\" or 1\\\" is right. Add 1\/8\\\" risers and go to 1.25\\\". Bigger risers or thick decks need 1.5\\\" or longer. You want the bolt to come through the nut fully without sticking out far past it.\"}}, {\"@type\": \"Question\", \"name\": \"Allen or Phillips bolts?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Allen bolts use a hex key, which grips better and is less likely to strip, and most skate tools have one built in. Phillips bolts use a screwdriver, which is easy to find anywhere. This set is Phillips.\"}}, {\"@type\": \"Question\", \"name\": \"How many bolts are in a pack? Is it enough for one board?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. You get 8 bolts and 8 low profile nuts, enough to mount two trucks to one deck.\"}}, {\"@type\": \"Question\", \"name\": \"Will 1 1\/4\\\" bolts work without risers?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"They'll work, but they may poke out past the nut on a standard deck. Without risers, 7\/8\\\" or 1\\\" is a cleaner fit.\"}}]}\n\u003c\/script\u003e","brand":"Shortys","offers":[{"title":"Default Title","offer_id":12145157046315,"sku":"24598","price":7.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2638\/2396\/products\/4979151784ad9c26872af9404147d549d3d3a551.gif?v=1540380387","url":"https:\/\/twelveboardstore.com.au\/products\/shortys-bolts-phillips-1-1-4","provider":"Twelve Board Store","version":"1.0","type":"link"}