{"product_id":"bronson-g3-bearings","title":"Bronson G3 Bearings","description":"\u003ch3\u003eBronson G3 Bearings\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eBronson's flagship bearing, built to stay fast after hard landings.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBronson G3s are the flagship bearing from Bronson Speed Co., designed for today's skateboarding. They're a strong, fast all-rounder for street, park and transition, and a big step up from stock bearings that come on most completes.\u003c\/p\u003e\n\n\u003cp\u003eDeep groove raceways let the balls sit deeper, cutting side impact damage, while micro groove raceway surfaces help oil spread for a faster spin. The Max Impact cage keeps the balls precisely spaced and Balls Out technology stops the shields and cage touching the balls on impact. Straight Edge frictionless shields resist popping off and keep oil in and dirt out, and high speed ceramic oil fights moisture and rust. Each set ships in nitrogen-filled shrink wrap with spacers and washers.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep groove raceways:\u003c\/strong\u003e balls sit deeper to resist side impacts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Edge frictionless shields:\u003c\/strong\u003e pop-off resistant, keep oil in and dirt out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicro groove raceway surfaces:\u003c\/strong\u003e better lubrication and spin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Impact cage:\u003c\/strong\u003e keeps balls spaced under impact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalls Out technology:\u003c\/strong\u003e no shield or cage contact on impact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh speed ceramic oil:\u003c\/strong\u003e resists moisture, rust and corrosion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpacers and washers included:\u003c\/strong\u003e 4 spacers and 8 washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating \/ standard:\u003c\/strong\u003e Bronson G3 (no ABEC rating)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 608 standard, 8mm bore\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel races and balls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShields:\u003c\/strong\u003e Straight Edge frictionless, removable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCage:\u003c\/strong\u003e Max Impact cage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLubricant:\u003c\/strong\u003e High speed ceramic oil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpacers \/ washers:\u003c\/strong\u003e 4 spacers and 8 washers included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Nitrogen-filled shrink wrap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Set of 8 bearings\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAbout Bronson\u003c\/h3\u003e\n\u003cp\u003eBronson Speed Co. is the bearing brand from NHS, the Santa Cruz, California company behind Santa Cruz Skateboards, Independent Trucks and OJ Wheels. It was built around one job: making bearings designed for the impacts, side loads and dirt that modern skateboarding throws at them.\u003c\/p\u003e\n\u003cp\u003eBronson is known for its G3 platform and its shield-free Raw bearings. Deep groove raceways, the Max Impact cage and Balls Out design are all aimed at keeping a bearing fast after hard landings, and every set ships nitrogen sealed so it is fresh when you open it. Riders pick Bronson for strong, quick bearings with real skate engineering behind them.\u003c\/p\u003e\n\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo these fit all skateboard wheels?\u003c\/strong\u003e\u003cbr\u003e\nYes. They're standard 608 size skateboard bearings with an 8mm bore, so they fit almost every skateboard, cruiser and longboard wheel on a standard 8mm axle. Each wheel takes two bearings, so this set of 8 does all four wheels on one board.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat does G3 mean? Is it an ABEC rating?\u003c\/strong\u003e\u003cbr\u003e\nNo. G3 is the third generation of Bronson's own bearing design, not a precision rating. ABEC only measures machining tolerances for industrial use, so Bronson engineers for skateboard impacts and side loads instead, with deep raceways, a tougher cage and shields that don't touch the balls.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow do I clean and look after G3 bearings?\u003c\/strong\u003e\u003cbr\u003e\nPop the Straight Edge shields off with a pin, flush the bearings in citrus degreaser or isopropyl alcohol and let them dry completely. Add a couple of drops of skate bearing oil, refit the shields and spin them in. Keep them dry and clean them whenever they sound gritty.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo I need spacers?\u003c\/strong\u003e\u003cbr\u003e\nThe set includes 4 spacers and 8 washers, so you've got everything. Spacers sit on the axle between the two bearings in each wheel, so the bearings stay lined up when you tighten the axle nut. Lots of street skaters ride without them, but they help bearings spin freely and stop them being crushed if the nut is over-tightened.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAre Bronson G3s good for street skating?\u003c\/strong\u003e\u003cbr\u003e\nYes. They're designed around impacts, with deep raceways, a tough cage and Balls Out design to keep them fast after jumps and drops. They suit street, park and bowl equally well.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Buy From Twelve Board Store\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e✔️ Free shipping Australia-wide on orders over $90\u003c\/li\u003e\n\u003cli\u003e✔️ Expert skate advice from real riders, 7 days a week\u003c\/li\u003e\n\u003cli\u003e✔️ Easy returns for a hassle-free experience\u003c\/li\u003e\n\u003cli\u003e✔️ Huge range of skate, snow \u0026amp; electric gear\u003c\/li\u003e\n\u003cli\u003e✔️ Proudly Australian owned \u0026amp; operated\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eBronson Speed Co. Built to go fast and stay fast.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Do these fit all skateboard wheels?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. They're standard 608 size skateboard bearings with an 8mm bore, so they fit almost every skateboard, cruiser and longboard wheel on a standard 8mm axle. Each wheel takes two bearings, so this set of 8 does all four wheels on one board.\"}}, {\"@type\": \"Question\", \"name\": \"What does G3 mean? Is it an ABEC rating?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. G3 is the third generation of Bronson's own bearing design, not a precision rating. ABEC only measures machining tolerances for industrial use, so Bronson engineers for skateboard impacts and side loads instead, with deep raceways, a tougher cage and shields that don't touch the balls.\"}}, {\"@type\": \"Question\", \"name\": \"How do I clean and look after G3 bearings?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Pop the Straight Edge shields off with a pin, flush the bearings in citrus degreaser or isopropyl alcohol and let them dry completely. Add a couple of drops of skate bearing oil, refit the shields and spin them in. Keep them dry and clean them whenever they sound gritty.\"}}, {\"@type\": \"Question\", \"name\": \"Do I need spacers?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The set includes 4 spacers and 8 washers, so you've got everything. Spacers sit on the axle between the two bearings in each wheel, so the bearings stay lined up when you tighten the axle nut. Lots of street skaters ride without them, but they help bearings spin freely and stop them being crushed if the nut is over-tightened.\"}}, {\"@type\": \"Question\", \"name\": \"Are Bronson G3s good for street skating?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. They're designed around impacts, with deep raceways, a tough cage and Balls Out design to keep them fast after jumps and drops. They suit street, park and bowl equally well.\"}}]}\n\u003c\/script\u003e","brand":"Bronson","offers":[{"title":"Default Title","offer_id":12876961742891,"sku":"13873","price":56.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2638\/2396\/products\/Bronson-G3-Bearings.gif?v=1540377161","url":"https:\/\/twelveboardstore.com.au\/en-sg\/products\/bronson-g3-bearings","provider":"Twelve Board Store","version":"1.0","type":"link"}